Options & Accessories

Options & Accessories

Available Capacities and Heat Sources for ENCON Thermal Evaporators

Encon offers a number of different heat sources options for our thermal evaporator line. This allows you to select the most cost effective option for your individual needs.

Thermal Evaporators are available in capacities ranging from 8 gallons per hour up to 400 gallons per hour. Please reference the chart below to see what sizes are available for your preferred heat source.

Need larger capacity? Please check out our MVC Evaporator line ».

Available Gallon/Hour Capacities By Heat Source
  8 10 12 15 16 18 24 26 28 35 40 44 48 60 63 72 88 96 126 165 192 260 400
Electric X     X     X       X                        
Natural Gas   X       X     X X     X X   X   X X X X X X
Propane   X       X     X X     X X   X   X X X X X X
#2 Fuel Oil   X       X     X X     X X   X   X X X X X X
Kerosene   X       X     X X     X X   X   X X X X X X
Diesel   X       X     X X     X X   X   X X X X X X
Off-Spec Landfill Gas   X       X     X X     X X   X   X X X X X X
Steam   X       X     X X     X X   X   X X X X X X
Waste Oil     X   X     X       X     X   X            
Waste Heat   X       X     X X     X X   X   X X X X X X

Material Of Construction

All ENCON Thermal Evaporators are clad with 304 stainless steel exterior for long term corrosion resistance. The standard material of construction for the tank and heat exchanger (the parts of the evaporator that come in contact with the wastewater) are manufactured from 316L stainless steel. This provides excellent corrosion resistance for many types wastewaters. Unlike others, ENCON does not use 304 stainless steel on wetted parts of the evaporator and charge extra for 316.

Exterior Material of Construction: 304 stainless steel
Tank Material of Construction: Standard - 316L stainless steel
Optional - High nickel alloys
Optional - Chloride resistant alloys
Heat Exchanger Material of Construction: Standard - 316L stainless steel
Optional - High nickel alloys
Optional - Chloride resistant alloys

Control Panel

V1 Panel

NEMA 4 PLC control panel with touch screen OIT provides readout of wastewater and heated air temperatures along with alarm and operating conditions for maximum operator feedback. Built-in cycle timer and Ethernet port.

Standard on: Thermal units 72gph or smaller heated by natural gas, propane, kerosene, electricity or off-spec landfill gas.

V2 Panel

Has all the functionality of the standard V1 control logic with the addition of analog output and Auto-Decant capabilities.

Standard on: oil, diesel, and waste oil powered thermal evaporators, thermal evaporators with the auto-decant option and all thermal evaporators 96gph and above.

V3 Panel

Larger touch screen interface with graphical display and the ability to view data logs on the control screen.

AB1400 Panel

Allen Bradley PLC

Accessories

Sampling of available accessories to increase the functionality of the ENCON Thermal Evaporator.

Digital Combustion Analysis Kit

Digital combustion flue gas analyzer. Capable of providing readings on CO, CO2, O2, pressure and temperature of flue gases. Includes analyzer, sampling probe, filter/water trap, battery charger and carrying case.

HDPE Cone Bottom Holding Tank w/ Stand

HDPE Cone Bottom Holding Tank with Integrated Stand. Available from 175 - 2,500 gallon capacity.

Feed Pump

Feed Pumps are designed to transfer the wastewater from a holding tank/sump to the evaporator.

Residue Pump

Residue pumps are designed to transfer the residue to a holding tank/sump from the evaporator.

Condenser w/ Condensate Sump

This upgrade is designed to condense the evaporated water vapor and send it to a tank within 20 feet of the evaporator for re-use. This upgrade includes upgraded PLC and programming, draft inducer, condenser and automatic condensate sump. Cooling water is required.

Auto-Dump / Auto-Restart

This upgrade is designed to automate the emptying of the evaporator to a customer supplied residue holding tank and to allow the evaporator to restart upon completion. This option includes evaporator tank empty level probe, electrically actuated ball valve on the evaporator outlet and a high temperature level probe for the residue holding tank.

Auto-Decant / Auto-Restart

This upgrade is designed to automate the decanting of the floating oil layer in the evaporator to a customer supplied oil holding tank and to allow the evaporator to restart upon completion. This option includes an upgraded PLC and programming, water/oil sensing probe, electrically actuated ball valve on the evaporator oil decant outlet and a high temperature level probe for the oil holding tank.